Displaying port summary information – 3Com 1100 User Manual
Page 113
Displaying and Changing Bridging/VLANs Information
113
2 Enter the number of the port to be enabled or disabled.
The following prompt is displayed:
Enter new value (disable, enable) [disable]:
3 Enter
enable
or
disable
.
Displaying Port
Summary
Information
You can display summary information about a port, or all ports, of the
current Switch unit using the
summary
command on the Port menu.
To display the port summary information:
1 At the Top-level menu, enter:
bridge port summary
The following prompt is displayed:
Select bridge port (1-12, all) [all]:
2 Enter the number of a port on the Switch unit, or
all
.
The port summary information for the Switch is displayed as shown in the
example below.
The following port summary information is displayed:
■
State
— Displays the parameters that provide the state of the port,
the possible values are:
■
Disabled - port is disabled
■
Link Down - port is enabled but link is down
Port
stpState
fwdTransitions
stpCost
------------------------------------------------------
-
1
Disabled
0
19
2
Disabled
0
19
3
Disabled
0
19
4
Disabled
0
19
5
Disabled
0
19
6
Disabled
0
19
7
Disabled
0
19
8
Disabled
0
19
9
Disabled
0
19
10
Disabled
0
19
11
Disabled
0
19
12
Disabled
0
19
13
Disabled
0
19
Select menu option: