3Com 1100 - Manual (Page 208)

208 C HAPTER 10: RMON
sessions, the forwarding performance of the Switch is not affected but
you may experience slow response times from the web interface.
The Alarm Events You can define up to 200 alarms for the Switch. The events that you can
define for each alarm are shown in Table 11.
The Default Alarm
Settings
A new or initialized Switch has two alarms defined for each port:
■
Broadcast bandwidth used
■
Percentage of errors over one minute
The default values and actions for each of these alarms are given in
Table 12 .
Table 11 Alarm Events
Event Action
No action
Notify only Send Trap.
Notify and filter port Send Trap. Block broadcast and multicast
traffic on the port. Recovers with the unfilter
port event.
Notify and disable port Send Trap. Turn port off.
Notify and enable port Send Trap. Turn port on.
Disable port Turn port off.
Enable port Turn port on.
Notify and switch resilient port Send Trap. If port is the main port of a
resilient link pair then move to standby.
Notify and unfilter port Send Trap. Stop blocking broadcast and
multicast traffic on the port.
Set Forwarding Mode to Store
and Forward
Set Forwarding Mode to
Fast Forward
System started
Software Upgrade report