3Com 1100 - Manual (Page 138)

138 C HAPTER 4: W ORKING W ITH THE C OMMAND L INE I NTERFACE
2 Enter the community string of the trap destination device.
The following prompt is displayed:
Enter the trap destination address:
3 Enter the IP address of the trap destination device.
Displaying Trap
Destination Details
You can display the community string and IP address of the current trap
destination devices using the
display command on the SNMP/Trap
menu.
To display trap destination details:
■
At the Top-level menu, enter:
snmp trap display
The trap destination details are displayed.
An example of the information is shown below:
Modifying Trap
Destination Details
You can modify the community string and IP address of a current trap
destination device using the
modify
command on the SNMP/Trap menu.
To modify trap destination details:
1 At the Top-level menu, enter:
snmp trap modify
The following prompt is displayed:
Select trap index (1,2,3):
2 Enter the index number of the trap destination device to be modified.
The following prompt is displayed:
Enter the trap community string [monitor]:
3 Enter the new community string of the trap destination device.
The following prompt is displayed:
Enter the trap destination address [<ip address>]:
4 Enter the new IP address of the trap destination device.
Index Community String Destination Address
1 monitor 191.1.1.1
2 monitor 191.1.1.2
3 monitor 191.1.1.3
4 monitor 191.1.1.4