Changing the management settings for the stack, Specifying a descriptive name, Changing the management settings for the stac – 3Com 1100 User Manual
Page 67: Changing the management, Settings for the stack, Changing the management settings for, The stack
Changing the Management Settings for the Stack
67
The Console Port Configuration page contains the following elements:
Console connection Terminal / Modem
Allows you to specify the device that you are connecting to the console
port.
Port Speed AutoConfig / 1200 / 2400 / 4800 / 9600 / 19200
Allows you to specify the line speed (baud) of the console port. If you
select AutoConfig, the line speed of the port is automatically set to the
line speed of the terminal or modem.
For the AutoConfig system to work, you need to reset the Switch.
Flow Control None / Hardware RTS/CTS
Allows you to specify the serial line flow control option suitable for your
terminal or modem. See the documentation accompanying your terminal
or modem if you are unsure of the correct setting.
Changing the
Management
Settings for the
Stack
You can change the management settings for the stack using the
Management Settings Pages. These pages allow you to:
■
Specify a descriptive name for the stack.
■
Change your password.
■
Specify the physical location of the stack.
■
Access the Getting Started pages for the stack.
■
Specify the location of the online help and documentation for the
stack.
■
Specify the details of a person to contact about the stack.
Specifying a
Descriptive Name
You can specify a descriptive name for the stack using the System Name
page.
To access the page:
1 Click the Management Settings icon on the side-bar.
2 Click the System Name hotlink. The System Name page is displayed as
.