3Com 1100 - Manual (Page 51)

The Main Web Interface 51
■
Unit Status — This page allows you to display the general
administration details of the Switch.
■
IP Setup — This page allows you to set up IP information for the
Switch.
■
Port Setup — This page allows you to configure individual ports
on the Switch.
■
Console Port Configuration — This page allows you to configure
the console port of the Switch.
For more information, see “Configuring the Current Switch” on
page 54 .
■
Management Settings Pages — These pages allow you to change
the management settings for the stack:
■
System Name — This page allows you to specify a descriptive
name for the stack.
■
Password Setting — This page allows you to change your
password.
■
Location — This page allows you to specify the physical location
of the stack.
■
Getting Started — This page allows you to access the Getting
Started pages for the stack.
■
Documentation — This page allows you to specify the location of
the online help and documentation for the stack.
■
Contact — This page allows you to specify the details of a person
to contact about the stack.
For more information, see “Changing the Management Settings for
the Stack” on page 67 .
■
Configuration Pages — These pages allow you to configure the
stack as a whole:
■
VLAN Setup — This page allows you to configure VLANs for the
stack.
■
Switch Database — This page allows you to configure the Switch
Database of the stack.
■
Software Upgrade — This page allows you to upgrade the
management software of the Switch units in the stack.