Edimax Technology 3G-6200n - Manual (Page 13)

12
5. Click OK to confirm the setting. Your PC will now obtain an IP address
automatically from your Broadband Router’s DHCP server.
Note: Please make sure that the Broadband router is the only DHCP
server on your LAN.
Once you’ve configured your PC to obtain an IP address
automatically, please proceed to Step 3
2c) Windows 2000
1. Click the Start button and select Settings, then click Control Panel.
The Control Panel window will appear.
2. Double-click Network and Dial-up Connections icon. In the Network
and Dial-up Connection window, double-click Local Area Connection
icon. The Local Area Connection window will appear.
3. In the Local Area Connection window, click the Properties button.
4. Check your list of Network Components. You should see Internet
Protocol [TCP/IP] on your list. Select it and click the Properties button.
5. In the Internet Protocol (TCP/IP) Properties window, select Obtain an
IP address automatically and Obtain DNS server address
automatically as shown on the following screen.