Edimax Technology 3G-6200n User Manual
Page 14
13
6. Click OK to confirm the setting. Your PC will now obtain an IP address
automatically from your Broadband Router’s DHCP server.
Note: Please make sure that the Broadband router is the only DHCP
server on your LAN.
Once you’ve configured your PC to obtain an IP address
automatically, please proceed to Step 3
.
2d) Windows NT
1. Click the Start button and select Settings, then click Control Panel.
The Control Panel window will appear.
2. Double-click Network icon. The Network window will appear. Select
the Protocol tab from the Network window.
3. Check if the TCP/IP Protocol is on your list of Network Protocols. If
TCP/IP is not installed, click the Add button to install it now. If TCP/IP
is installed, go to step 5.
4. In the Select Network Protocol window, select the TCP/IP Protocol
and click the Ok button to start installing the TCP/IP protocol. You may
need your Windows CD to complete the installation.