Edimax Technology 3G-6200n - Manual (Page 70)

69
2.6 QoS
The QoS function can classify Internet application traffic by
source/destination IP address and port number. You can assign priority
for each type of application and reserve bandwidth for it. The packets of
applications with higher priority will always go first. Lower priority
applications will get bandwidth after higher priority applications get
enough bandwidth. This can let you have a better experience in using
delay-sensitive services like Internet phone, video conference …etc. All
the applications not specified by you are classified as rule name
“Others”. The rule with smaller priority number has higher priority; the
rule with larger priority number has lower priority. You can adjust the
priority of the rules by moving them up or down.
Note: If the total assigned bandwidth of higher priority applications is
larger than the maximum bandwidth provided by the WAN port, then
other applications will not get any bandwidth.
Parameters Description
Enable QoS
You can check “Enable QoS” to enable QoS function
for the WAN port. You also can uncheck “Enable QoS”
to disable QoS function for the WAN port.
Total
Download
Here you can set maximum download bandwidth for
all the users of the router.