Edimax Technology 3G-6200n - Manual (Page 46)

45
2.1.3 Remote Management
The remote management function allows you to designate a host in the
Internet the ability to configure the Broadband router from a remote site.
Enter the designated host IP Address in the Host IP Address field.
Parameters Description
Host Address
This is the IP address of the host in the Internet that
will have management/configuration access to the
Broadband router from a remote site. This means if
you are at home and your home IP address has
been designated the Remote Management host IP
address for this router (located in your company
office), then you’ll be able to configure this router
from your home. If the Host Address is 0.0.0.0,
means anyone can access the router’s web-based
configuration from a remote location, if they know
the password.
Click the Enabled box to enable the Remote
Management function.
Note: When you want to access the web-based
management from a remote computer, you must
enter the router’s WAN IP address (e.g. 10.0.0.1)
into your web-browser followed by colon and port
number 8080, e.g. 10.0.0.1:8080 (see below). You’ll
also need to know the password set in the
Password Setting screen in order to access the
router’s web-based management.