Edimax Technology 3G-6200n - Manual (Page 34)

33
Internet exceeds the “Idle Time”.
If you select “Manual”, the router will connect to ISP
only when you click “Connect” manually from the
Web management interface. The WAN connection
will not disconnect because of idle timeout. If the
WAN line drops and connected at a latter time
again, the router will not connect to the ISP by itself.
Idle Time
You can specify an idle time (minutes) for the WAN
port. This means if no packets have been sent (no
one using the Internet) during this specified period,
the router will automatically disconnect the
connection to your ISP.
Note: This “idle timeout” function may not work due
to abnormal activities of some network application
software, computer virus or hacker attacks from the
Internet. For example, some software sends data to
the Internet in the background, even when you are
not using the Internet. So please turn off your
computer when you are not using it. This function
also may not work with some ISP. So please make
sure this function can work properly when you use
this function in the first time, especially when your
ISP charge you by the connection time.
Click <OK> when you have finished the configuration above.
Congratulations! You have completed the configuration for the PPPoE
connection. You can start using the router now, if you wish to use some
of the advance features supported by this router see chapter 2, 3, 4.