Edimax Technology 3G-6200n - Manual (Page 51)

50
2.3.2 Static IP Address
Select Static IP address if your ISP assigned you with a specific IP
address for you to use. Your ISP should provide all the information
required in this section. (See chapter 1 “Fixed IP” for more detail)
2.3.3 PPPoE (PPP over Ethernet)
Select PPPoE if your ISP requires the PPPoE protocol to connect you to
the Internet. Your ISP should provide all the information required in this
section. (See chapter 1 “PPPoE” for more detail)
2.3.4 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to
the Internet. Your ISP should provide all the information required in this
section. (See chapter 1 “PPTP” for more detail)
2.3.5 L2TP
Select L2TP if your ISP requires the L2TP protocol to connect to the
Internet. Your ISP should provide all the information required in this
section. (See chapter 1 “L2TP” for detailed information)
2.3.6 Telstra Big Pond
Select Telstra Big Pond if your ISP requires the Telstra Big Pond
protocol to connect to the Internet. Your ISP should provide all the
information required in this section. Telstra Big Pond protocol is used by
the ISP in Australia. (See chapter 1 “Telstra Big Pond” for more detail)