Edimax Technology 3G-6200n - Manual (Page 30)

29
Step 3) Broadband Type ( Connect to Internet via Ethernet )
3G-6200n provides two types of Internet connection method: wireless
(3G/3.5G) or wired connection. You can access internet via USB 3G/3.5G
modem card, or via wired xDSL / cable modem connection. However, only
one connection method (wireless or wired) can be used at the same time.
In this section you have to select one of six types of connections that
you will be using to connect your broadband router’s WAN port to your
ISP (see screen below).
Note: Different ISP’s require different methods of connecting to the
Internet, please check with your ISP as to the type of connection it
requires.
Menu Description
Cable Modem Your ISP will assign you with an IP address
automatically
Fixed-IP xDSL Your ISP gave you an IP address already
PPPoE xDSL Your ISP requires you to use Point-to-Point Protocol
over Ethernet (PPPoE)
PPTP xDSL Your ISP requires you to use a Point-to-Point
Tunneling Protocol (PPTP)
L2TP xDSL Your ISP requires you to use a Layer Two Tunneling
Protocol (L2TP)
Telstra Big Pond This Protocol only used for Telstra Big Pond Internet
service in Australia