Edimax Technology 3G-6200n - Manual (Page 31)

30
Click on one of the WAN type and then proceed to the manual’s relevant
sub-section (1.1, 1.2, 1.3, 1.4, 1.5 or 1.6). Click on Back to return to the
previous screen.
1.1 Cable Modem
Choose Cable Modem if your ISP will assign you with an IP address
automatically (i.e. DHCP). Some ISP’s may also require that you fill in
additional information such as host name and MAC address (see screen
below).
Note: The Host Name and MAC address section is optional and you
can skip this section if your ISP does not require these settings.
Parameters Description
Host Name
If your ISP requires a Host Name, type in the host
name provided by your ISP, otherwise leave it blank
if your ISP does not require a Host Name.
MAC Address
Your ISP may require a particular MAC address to
connect to the Internet. This MAC address is the
PC’s MAC address that your ISP had originally
connected your Internet connection to. Type in this
MAC address in this section or use the “Clone MAC
Address” button to replace the WAN MAC address
with the MAC address of that PC (you have to be
using that PC for the Clone MAC Address button to
work). To find out the PC’s MAC address see
Appendix A. (see Glossary for an explanation on
MAC address)
Click <OK> when you have finished the configuration above.
Congratulations! You have completed the configuration for the Cable
Modem connection. You can start using the router now, if you wish to
use some of the advance features supported by this router see chapter
2, 3, 4.