Edimax Technology 3G-6200n - Manual (Page 15)

14
5. After you install TCP/IP, go back to the Network window. Select
TCP/IP from the list of Network Protocols and then click the Properties
button.
6. Check each of the tabs and verify the following settings:
• IP Address: Select Obtain an IP address from a DHCP server.
• DNS: Make all fields blank.
• WINS: Make all fields blank.
• Routing: Make all fields blank.
7. Click OK to confirm the setting. Your PC will now obtain an IP address
automatically from your Broadband Router’s DHCP server.
Note: Please make sure that the Broadband router is the only DHCP
server on your LAN.
Once you’ve configured your PC to obtain an IP address
automatically, please proceed to Step 3
3) Once you have configured your PCs to obtain an IP address
automatically, the router’s DHCP server will automatically give each of
your LAN clients an IP address. By default the Broadband Router’s
DHCP server is enabled so that you can obtain an IP address