Edimax Technology 3G-6200n - Manual (Page 60)

59
and waiting for pickup.
Data Rate
The “Data Rate” is the rate this access point used to
transmit data packets. The access point will use the
highest possible selected transmission rate to
transmit the data packets.
N Data Rate
We provide”MCS0~MCS7 and Auto” for
configuration, and default setting is “Auto” .
Channel Width
The default setting is “Auto 20/40MHz”, and the
default setting will provide you better wireless
performance than “20MHz”.
Preamble
Type
The “Long Preamble” can provide better wireless
LAN compatibility while the “Short Preamble” can
provide better wireless LAN performance.
Broadcast
ESSID
If you enable “Broadcast ESSID”, every wireless
station located within the coverage of this access
point will discover this access point more easily. If
you are building a wireless network which will open
to the public, it’s recommended to enable this
feature. Disabling “Broadcast ESSID” can provide
better security.
CTS Protect
It is recommended to enable the protection
mechanism. This mechanism can decrease the rate
of data collision between 802.11b and 802.11g
wireless stations. When the protection mode is
enabled, the throughput of the AP will be a little lower
due to many of frame traffic will be transmitted.
Tx Power
You can adjust the wireless transmit power here. By
reduce the TX power, you can reduce the wireless
coverage to make it only cover the area you need.
WMM
WMM stands for Wi-Fi Multimedia. It is a standard
created to define quality of service (QoS) in Wi-Fi
networks. This adds prioritized capabilities to Wi-Fi
networks and optimizes their performance when
multiple concurring applications, each with different
latency and throughput requirements, compete for
network resources.
Click <Apply> at the bottom of the screen to save the configurations.
You can now configure other advance sections or start using the router.