Edimax Technology AR-7211B V2 - Manual (Page 27)

27
Parameter Description
User Name Enter the username exactly as your ISP assigned.
Password Enter the password that your ISP has assigned to you.
VPI
Virtual path identifier (VPI) is the virtual path between two
points in an ATM network. Its valid value is in the range of 0
to 255. Enter the correct VPI provided by your ISP. By default,
VPI is set to 8.
VCI
Virtual channel identifier (VCI) is the virtual channel between
two points in an ATM network. Its valid value is in the range
of 32 to 65535 (0 to 31 is reserved for local management of
ATM traffic). Enter the correct VCI provided by your ISP. By
default, VCI is set to 35.
Connection type Please check with your ISP the method of multiplexing. In
PPPoE/PPPoA mode, please select “PPPoE LLC”, “PPPoE
VCMUX”, “PPPoA LLC” or “PPPoA VCMUX”.