Edimax Technology AR-7211B V2 - Manual (Page 77)

77
Field Description
priority and P3 is the lowest.
IP Precedence You can choose from 0 to 7 define the priority in the
ToS of the IP data packet.
IP ToS The type of IP ToS for classifying the data package
You can choose Normal Service, Minimize Cost,
Maximize Reliability, Maximize Throughput, or
Minimize Delay.
802.1p You can choose from 0 to 7.
delete Select a row in the QoS rule list and click it to delete
the row.
delete all Select all the rows in the QoS rule list and click it to
delete the rows.
5.6.4. SNMP
Choose Advanced > SNMP, the page shown in the following figure will appear.
Here, you can configure the SNMP parameters.
Field Description
Enable SNMP
Select Enable to enable SNMP function. You need to
enable SNMP in order to configure the parameters of
this page.
Trap IP Address
Enter the trap IP address. The trap information is sent
to the corresponding host.