Edimax Technology AR-7211B V2 - Manual (Page 34)

34
Note: When subscribing to a broadband service, you should be aware of the
method by which you are connected to the Internet. Your physical WAN
device can be either PPP, ADSL, or both. The technical information about the
properties of your Internet connection is provided by your Internet service
provider (ISP). For example, your ISP should inform you whether you are
connected to the Internet using a static or dynamic IP address, and the
protocol that you use to communicate on the Internet. If you are unsure
about your type of Internet connection, please contact your ISP.
2. Select your WAN connection type: PPP over ATM (PPPoA), PPP over
Ethernet (PPPoE), 1483 MER, 1483 Routed or 1483 Bridged and refer to
the appropriate section of the manual accordingly:
5.2.1. PPPoE/PPPoA
Note: The settings for PPPoA and PPPoE connection types are the same.
Set the encapsulation mode to LLC/SNAP and click Next to continue: