Edimax Technology AR-7211B V2 User Manual
Page 51
![background image](/manuals/233838/51/background.png)
51
Field
Description
Remote IP Address
Enter the gateway IP address provided
by your ISP.
Netmask
Enter the subnet mask of the local IP
address.
Unnumbered
Check
this
box
to
enable
IP
unnumbered function.
Add
After configuring the parameters of
this page, select “Add” to add a new
PVC into the Current ATM VC Table.
Modify
Select a PVC in the Current ATM VC
Table, then modify the parameters of
this PVC. When finished, click “Modify”
to apply the settings of this PVC.
Current ATM VC Table
This table shows existing PVCs. It
shows the interface name, channel
mode, VPI/VCI, encapsulation mode,
local IP address, remote IP address and
other information. The maximum
number of items that can be added to
this table is eight.
Click this icon to modify the PVCs’
parameters.
After adding a PPPoE ATM VC, and clicking in PPPoE mode, the following
page will appear. In this page, you can configure the parameters of this PPPoE
PVC.