Edimax Technology AR-7211B V2 - Manual (Page 85)

85
Field Description
Host
The address of a destination host to
be diagnosed.
NumberOfTries Repeat times.
Timeout Timeout duration.
Datasize Data packet size.
DSCP
A differentiated services code point
in the TOS identification byte for
service categories in the IP header of
every data packet. A DSCP prioritizes
by coding values using the used 6-bit
bytes and unused 2-bit bytes.
MaxHopCount Maximum number of routes.
Interface Select an interface.
Traceroute Click to start tracing the route.
Show Result Click to display the result.
5.8.3. OAM Loopback
Choose Diagnostic > OAM Loopback, and you will see the following page.
Connectivity verification is supported by the use of the OAM loopback
capability for both VP and VC connections. This page is used to perform the
VCC loopback function to check the connectivity of the VCC.