Edimax Technology AR-7211B V2 - Manual (Page 84)

84
Field Description
enable NTP if you want to configure the parameters
of NTP.
Server Set the primary NTP server manually.
Server2 Set the secondary NTP server manually.
Time Zone
Choose the time zone in which area you are from
the drop down list.
5.8. Diagnostic
In the navigation bar, click Diagnostic. The Diagnostic page that is displayed
contains Ping, Traceroute, OAM Loopback, ADSL Statistics and Diag-Test.
5.8.1. Ping
Choose Diagnostic > Ping. The page shown in the following figure will appear.
Field Description
Host Enter the valid IP address or domain name.
PING Click it to start to Ping.
5.8.2. Traceroute
Choose Diagnostic > Traceroute. Using this route diagnosis you can see the
route your PC data takes to another PC on the Internet.