Edimax Technology AR-7211B V2 - Manual (Page 66)

66
Field Description
Direction Select
Select the router interface. You can select LAN or WAN.
In this example, WAN is selected.
WAN Setting You can choose Interface or IP Address.
WAN Interface
Choose the interface that permits data packets from
WAN to access the router.
IP Address
Enter the IP address on the WAN. Only the IP address
that is in the same network segment with the IP address
on the WAN can access the router.
Services Allowed
You can choose the following services from WAN: web,
telnet, ssh, ftp, tftp, snmp or ping. You can also choose
all of the services.
Add
After setting the parameters, click “Add” to add an entry
to the Current ACL Table.
Reset Click to refresh this page.