HONDA 2012 CR-V - Manual (Page 100)

98
Co
ntrols
Setting the Clock
Clock
You can adjust the time in the clock display with the ignition switch in ON ( w .
■
Using the MENU button
1. Press the MENU button.
2. Select Adjust Clock with the
( + / ( - button, then press the SOURCE button.
3. Press the ( + / ( - button to change the
setting between 12 H and 24 H.
4. Select hour or minute with the /
button.
5. Press the ( + / ( - button to adjust the
numbers up or down.
6. Select Set with the / button, then
press the SOURCE button to enter your
selection.
u The display will return to the Adjust
Clock display.
■ Using the SETUP button
1. Press the SETUP button.
2. Rotate
to select Adjust Clock, then press .
3. Rotate to select the item you want to change (12/24 hour mode, hour,
minute). Then press .
4. Rotate to make the adjustment.
5. Press to enter your selection. The display returns to Adjust Clock. Repeat steps
4 to 6 to adjust other items.
6. To enter the selection, Rotate and select Set, then press .
7. Press the SETUP button to go back to the normal display.
1 Clock
These indications are used to show how to operate
the selector knob.
Rotate
to select.
Press to enter.
To set the time to the nearest hour:
Press and hold the CLOCK button until the clock
display begins to blink, then press the
( 6 (Reset)
button.
Depending on the displayed time, the clock sets
forward or backward.
Example:
1:06 will reset to 1:00
1:53 will reset to 2:00
The clock is automatically updated through the
navigation system, so the time does not need to be
adjusted.
Models with navigation system
Models with multi-information display
CR-V-31T0A600.book 98 ページ ２０１１年８月８日 月曜日 午後６時２６分