HONDA 2012 CR-V - Manual (Page 351)

349
uu Jump Starting u
Han
d
lin
g the U
n
expected
Once your vehicle's engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the assisting vehicle's -
terminal.
3. Disconnect the jumper cable from your vehicle's + terminal.
4. Disconnect the other end of the jumper cable from the assisting vehicle's +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
■ What to Do After the Engine Starts
CR-V-31T0A600.book 349 ページ ２０１１年８月８日 月曜日 午後６時２６分