HONDA 2012 CR-V - Manual (Page 120)

118
uu Operating the Switches Around the Steering Wheel u Turn Signals
Co
ntrols
Turn Signals
The turn signals can be used when the ignition
switch is in ON
( w .
Light Switches
Rotating the light switch turns the lights on
and off, regardless of the position of the
ignition switch.
■
High beams
Push the lever forward until you hear a click.
■
Low beams
When in high beams, pull the lever back to
return to low beams.
■ Flashing the high beams
Pull the lever back, and release it.
Right Turn
Left Turn
■ Manual Operation
1 Light Switches
If you remove the key from the ignition switch while
the lights are on, a chime sounds when the driver’s
door is opened.
When the lights are on, the lights on indicator in the
instrument panel will be on.
2 Lights On Indicator P. 76
Do not leave the lights on when the engine is off
because it will cause the battery to discharge.
High Beams
Flashing the high beams
Low Beams
Turns on parking, side marker,
tail, and rear license plate lights
Turns on headlights, parking, side
marker, tail, and rear license plate
lights
CR-V-31T0A600.book 118 ページ ２０１１年８月８日 月曜日 午後６時２６分