HONDA 2012 CR-V User Manual
Page 73
71
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Malfunction
Indicator Lamp
●
Comes on when you turn the ignition switch
to ON
(
w
, and goes off either when the
engine starts or after several seconds if the
engine is not started. If "readiness codes"
have not been set, it blinks five times before it
goes off.
●
Comes on if there is a problem with the
emissions control system.
●
Blinks when a misfire in the engine's cylinders
is detected.
●
Readiness codes are part of the on board diagnostics
for the emissions control systems.
2 Testing of Readiness Codes P. 369
●
Comes on while driving - Have the vehicle checked
by a dealer.
●
Blinks while driving - Stop in a safe place where
there are no flammable objects. Stop the engine for
10 minutes or more, and wait for it to cool down.
Then, take the vehicle to a dealer.
2 If the Malfunction Indicator Lamp Comes On or
Charging System
Indicator
●
Comes on when you turn the ignition switch
to ON
(
w
, and goes off when the engine
starts.
●
Comes on when the battery is not charging.
●
Comes on while driving - Turn off the heating and
cooling system
*
/climate control system
*
system and
rear defogger in order to reduce electricity
consumption.
2 If the Charging System Indicator Comes On
P. 353
Shift Lever
Position Indicator
●
Indicates current shift lever position.
(
d
indicator:
●
Comes on for a few seconds when you turn
the ignition switch to ON
(
w
, then goes off.
●
Comes on when you press the
(
d
button
while the shift lever is in
(
D
.
* Not available on all models
CR-V-31T0A600.book 71 ページ ２０１１年８月８日 月曜日 午後６時２６分