HONDA 2012 CR-V - Manual (Page 121)

119
uu Operating the Switches Around the Steering Wheel u Light Switches
Co
ntrols
Automatic lighting control can be used when
the ignition switch is in ON
( w .
When you turn the light switch to AUTO, the
headlights and other exterior lights will switch
on and off automatically depending on the
ambient brightness.
u You can change the auto light sensitivity
setting.
2 Customized Features P. 86
The headlights, all other exterior lights, and the instrument panel lights turn off
within 15 seconds after you remove the key and close the driver's door.
u You can change the headlight auto off timer setting.
2 Customized Features P. 86
If you turn the ignition switch to LOCK ( 0 with the headlight switch on, but do not
open the door, the lights turn off after 10 minutes (3 minutes, if the switch is in the
AUTO position).
The lights turn on again when you unlock or open the driver's door. If you unlock
the door, but do not open it within 15 seconds, the lights go off. If you open the
driver's door, you will hear a lights on reminder chime.
■ Automatic Lighting Control * 1 Automatic Lighting Control *
We recommend that you turn on the lights manually
when driving at night, in a dense fog, or in dark areas
such as long tunnels or parking facilities.
The light sensor is in the location shown below.
Do not cover this light sensor with anything;
otherwise, the automatic lighting system may not
work properly.
Adjust the auto light sensitivity as follows:
Setting The exterior lights come on
when the ambient light is at
MAX
HIGH
MID
LOW
MIN
Light Sensor
Bright
Dark
■
Automatic Lighting Off Feature
* Not available on all models
CR-V-31T0A600.book 119 ページ ２０１１年８月８日 月曜日 午後６時２６分