HONDA 2012 CR-V - Manual (Page 313)

311
uu Replacing Light Bulbs u Side Marker Light Bulb
Main
tenan
ce
2. Remove the coupler.
u It can be removed by pushing the tab.
3. Rotate the old bulb to the left to remove.
4. Insert new bulb.
Side Marker Light Bulb
When replacing, use the following bulbs.
1. Turn the socket to the left and remove it,
then remove the old bulb.
2. Insert a new bulb.
Bulb
Coupler Tab
Side Marker Light: 3 CP
1 Fog Light Bulbs *
Insert a flat-tip screwdriver, lift and remove the
central pin to remove the clip.
Insert the clip with the central pin raised, and push
until it is flat.
Central pin
Push until the
pin is flat.
Bulb Socket
* Not available on all models
CR-V-31T0A600.book 311 ページ ２０１１年８月８日 月曜日 午後６時２６分