HONDA 2012 CR-V - Manual (Page 75)

73
uu Indicators u
Continued
In
strum
e
nt Pa
nel
Indicator Name On/Blinking Explanation
ABS (Anti-lock
Brake System)
Indicator
● Comes on for a few seconds when you turn
the ignition switch to ON
( w , then goes off.
● If it comes on at any other time, there is a
problem with the ABS.
● Stays on constantly - Have the vehicle checked by a
dealer. With this indicator on, your vehicle still has
normal braking ability but no anti-lock function.
2 ABS (Anti-lock Brake System) P. 275
Supplemental
Restraint System
Indicator
● Comes on for a few seconds when you turn
the ignition switch to ON
( w , then goes off.
● Comes on if a problem with any of the
following is detected:
- Supplemental restraint system
- Side airbag system
- Side curtain airbag system
- Seat belt tensioner
● Stays on constantly or does not come on at all -
Have the vehicle checked by a dealer.
AWD System
Indicator
*
● Comes on for a few seconds when you turn
the ignition switch to ON
( w , then goes off.
● Comes on if there is a problem with the
AWD.
● Blinks when the AWD system is overheated.
The system is inactive.
● Stays on constantly - the engine drives the front
wheels only in this state. Have the vehicle checked by
a dealer.
● Blinks while driving - the engine drives the front
wheels only in this state. Stop in a safe place, shift to
( P , and idle the engine until the indicator goes off. If
the indicator does not stop blinking, take your vehicle
to a dealer.
2 REAL TIME AWD with Intelligent Control
System™* P. 270
* Not available on all models
CR-V-31T0A600.book 73 ページ ２０１１年８月８日 月曜日 午後６時２６分