HONDA 2012 CR-V - Manual (Page 316)

314
uu Replacing Light Bulbs u Upper Rear Side Marker/Taillight
Main
tenan
ce
Upper Rear Side Marker/Taillight
When replacing, use the following bulbs.
1. Remove the lower taillight assembly.
2 Brake Light, Taillight, Back-Up Light, Rear Turn Signal Light and Lower Rear
Side Marker Light Bulbs P. 312
2. Use a Phillip-head screwdriver to remove
the bolt.
3. Pull the light assembly out of the rear pillar.
4. Turn the socket to the left and remove it.
Remove the old bulb.
5. Insert a new bulb.
Upper Rear Side Marker/Taillight: 3CP
Bolt
Bulb
Socket
CR-V-31T0A600.book 314 ページ ２０１１年８月８日 月曜日 午後６時２６分