Climate control system, P132 ), Using automatic climate control – HONDA 2012 CR-Z User Manual

Page 134

Advertising
background image

132

Co
ntrols

Climate Control System

Using Automatic Climate Control

The automatic climate control system maintains the interior temperature you select.
The system also selects the proper mix of heated or cooled air that will as quickly as
possible, raise or lower the interior temperature to your preference.

Use the system when the engine is running.
1. Press the AUTO button.
2. Adjust the interior temperature using the temperature control dial.
3. Press the

button to cancel.

Switching between the recirculation and fresh air modes

Press the

button and switch the mode depending on environmental conditions.

Recirculation Mode (indicator on): Recirculates air from the vehicle’s interior through
the system.
Fresh Air Mode (indicator off): Maintains outside ventilation. Keep the system in
fresh air mode in normal situations.

1

Using Automatic Climate Control

If any buttons are pressed while using the climate
control system in AUTO, the function of the button
that was pressed will take priority.
The AUTO indicator will go off, but functions
unrelated to the button that was pressed will be
controlled automatically.

During the Auto Idle Stop, the air conditioning
system will be turned off.
If the ECON mode is selected, the fan may also be
turned off.
To prevent cold air from blowing in from outside, the
fan may not start immediately when the AUTO
button is pressed.

Once you have set the desired temperature, do not
use the temperature control dial more than
necessary.
Doing so may delay the time it takes to reach the set
temperature.
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows,
turning the system on AUTO, and setting the
temperature to low. Change the fresh air mode to
recirculation mode until the temperature cools down.

When you set the temperature to the lower or upper
limit, Lo or Hi is displayed.

Pressing the

button switches the climate

control system between on and off. When turned on,
the system returns to your last selection.

Dashboard
vents

Dashboard
and floor
vents

Floor vents

Floor and
defroster
vents

AUTO Button

A/C (Air Conditioning)
Button

(Fan Control) Button

(Recirculation) Button

Temperature
Control Dial

(Windshield Defogger) Button

(ON/OFF) Button

MODE Button

12 CR-Z-31SZT610.book 132 ページ 2011年8月29日 月曜日 午後8時8分

Advertising
This manual is related to the following products: