HONDA 2012 CR-Z - Manual (Page 141)

139
uu Audio System u Audio System Theft Protection
Features
Audio System Theft Protection
The audio system is disabled when it is disconnected from the power source, such as
when the 12 volt battery is disconnected or goes dead.
■
Reactivating the audio system
1. Turn the ignition switch to ON ( w , and turn on the audio system.
u If you turn the ignition switch to ACCESSORY ( q , you will be requested to
enter the audio security code.
2.
Enter the audio security code using the preset buttons.
Touch the icon to enter the code, then touch the Done icon to set it.
If you enter an incorrect digit, continue to the last digit, then try again. If you do
not enter the code correctly after 10 tries, leave the system for one hour before
trying again, or visit a dealer to have the system reset.
1 Audio System Theft Protection
Find the audio system's security code and serial
number label in your owner’s manual kit.
We recommend that you write down the serial
number in this owner’s manual.
Do not store the label in your vehicle. If you lose the
label, you must first retrieve the serial number, and
then obtain the code.
You can find out about your serial number and
security code from a dealer.
You can register the security code at Owner Link
(owners.honda.com.), and find information on how
to retrieve the serial number and obtain the code at
radio-navicode.honda.com.
U.S. models
Models without navigation system
Models with navigation system
12 CR-Z-31SZT610.book 139 ページ ２０１１年８月２９日 月曜日 午後８時８分