HONDA 2012 CR-Z - Manual (Page 267)

265
uu Replacing Light Bulbs u Rear License Plate Light Bulbs
Main
tenan
ce
Rear License Plate Light Bulbs
When replacing, use the following bulb.
1. Remove the lens by prying on the edge of
the lens using a flat-tip screwdriver.
u Wrap the flat-tip screwdriver with a cloth
to prevent scratches.
2. Remove the old bulb and insert a new bulb.
High-Mount Brake Light Bulbs
High-mount brake light bulbs are LED type. Have an authorized Honda dealer
inspect and replace the light bulbs.
Rear License Plate Light: 5 W
12 CR-Z-31SZT610.book 265 ページ ２０１１年８月２９日 月曜日 午後８時８分