HONDA 2012 CR-Z - Manual (Page 75)

73
uu Indicators u
Continued
In
strum
e
nt Pa
nel
Indicator Name On/Blinking Explanation Message
High
Temperature
Indicator
● Comes on for a few seconds when
you turn the ignition switch to ON
( w .
● Blinks when the engine coolant
temperature goes up, and stays
on if the temperature continues to
rise.
● Blinks while driving - Drive slowly to
prevent overheating.
● Stays on while driving - Immediately
stop in a safe place and allow the engine
to cool.
2 Overheating P. 297
IMA System
Indicator
● Comes on for a few seconds when
you turn the ignition switch to ON
( w .
● Comes on if there is a problem
with the IMA system.
● Remains on or does not come on at
all - Avoid high speed driving and have
the vehicle checked by a dealer as soon
as possible.
2 If the IMA Indicator Comes On
P. 303
System
Message
Indicator
● Comes on for a few seconds when
you turn the ignition switch to ON
( w , then goes off.
● Comes on along with a beep
when a problem is detected. A
system message on the multi-
information display appears at the
same time.
● While the indicator is on, press the
/ (information) button to see the
message again.
● Refer to the Indicators information in this
chapter when a system message appears
on the multi-information display. Take
the appropriate action for the message.
● The multi-information display does not
return to the normal screen unless the
warning is canceled, or the /
button is pressed.
—
4
4
12 CR-Z-31SZT610.book 73 ページ ２０１１年８月２９日 月曜日 午後８時８分