HONDA 2012 CR-Z - Manual (Page 270)

268
uu Checking and Maintaining Wiper Blades u Changing the Rear Wiper Blade Rubber
Main
tenan
ce
Changing the Rear Wiper Blade Rubber
1. Raise the wiper arm off.
2. Slide the wiper blade out from the wiper
arm while pushing the lock tab.
3. Slide the wiper blade out from its holder by
pulling the tabbed end out.
4. Remove the retainer from wiper blade and
mount it to a new rubber blade.
5. Slide the wiper blade onto the holder.
u Make sure it is engaged correctly, then
install the wiper blade assembly onto the
wiper arm.
1 Changing the Rear Wiper Blade Rubber
NOTICE
Avoid dropping the wiper arm; it may damage the
rear window.
Tabbed End
12 CR-Z-31SZT610.book 268 ページ ２０１１年８月２９日 月曜日 午後８時８分