HONDA 2012 CR-Z - Manual (Page 297)

295
uu Jump Starting u
Han
d
lin
g the U
n
expected
Once your vehicle's engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the assisting vehicle's -
terminal.
3. Disconnect the jumper cable from your vehicle's + terminal.
4. Disconnect the other end of the jumper cable from the assisting vehicle's +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
■ What to Do After the Engine Starts
12 CR-Z-31SZT610.book 295 ページ ２０１１年８月２９日 月曜日 午後８時８分