HONDA 2012 CR-Z - Manual (Page 262)

260
uu Replacing Light Bulbs u Fog Light Bulbs *
Main
tenan
ce
Fog Light Bulbs *
When replacing, use the following bulbs.
1. Turn the steering wheel all the way to the
opposite side from the fog light being
replaced.
Passenger side: Turn the steering wheel to
the left.
Driver side: Turn the steering wheel to the
right.
2. Remove the clip and screws, and pull the
inner fender back.
Fog Lights: 55 W (H11)
1 Fog Light Bulbs *
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
The fog lights are halogen bulbs.
When replacing a bulb, handle it by its plastic case,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Insert a flat-tip screwdriver, lift and remove the
central pin to remove the clip.
Central Pin
Inner Fender
Screw
Clip
* Not available on all models
12 CR-Z-31SZT610.book 260 ページ ２０１１年８月２９日 月曜日 午後８時８分