HONDA 2012 CR-Z - Manual (Page 263)

261
uu Replacing Light Bulbs u Fog Light Bulbs *
Main
tenan
ce
3. Remove the coupler.
u It can be removed by pushing the tab.
4. Rotate the old bulb to the left to remove.
5. Insert a new bulb into the light assembly
and turn it to the right.
6. Insert the coupler into the connector of the
bulb.
1 Fog Light Bulbs *
Insert the clip with the central pin raised, and push
until it is flat.
Push until the
pin is flat.
Bulb
Tab
Coupler
* Not available on all models
12 CR-Z-31SZT610.book 261 ページ ２０１１年８月２９日 月曜日 午後８時８分