HONDA 2012 CR-Z - Manual (Page 265)

263
uu Replacing Light Bulbs u Back-Up Light, Rear Turn Signal Light and Rear Side Marker Light Bulbs
Continued
Main
tenan
ce
Back-Up Light, Rear Turn Signal Light and Rear Side
Marker Light Bulbs
When replacing, use the following bulbs.
1. Pry on the edge of the cover using a flat-tip
screwdriver to remove the cover.
u Wrap the flat-tip screwdriver with a cloth
to prevent scratches.
2. Remove the bolts.
3. Pull the light assembly out of the rear pillar.
Back-Up Light: 16 W
Rear Turn Signal Light: 21 W (Amber)
Rear Side Marker Light: 3 CP
Cover
12 CR-Z-31SZT610.book 263 ページ ２０１１年８月２９日 月曜日 午後８時８分