Acroprint Attendance Rx - Manual (Page 51)

Installed Biometrics Device
Once Biometrics Functionality is enabled, you will need to install an FIU device on each
workstation where your employees clock IN or OUT.
To install a new Biometrics Device:
1. Attach the FIU device to an available USB port. On most workstations the
operating system will find and automatically install the new device.
2. Click the Biometrics tab on the Systems Utilities screen.
3. Choose the appropriate device from the drop down field under “Installed
Biometrics Device”.
4. A dialog box will be displayed indicating the status of the device and availability of
the drivers. Follow the directions on the screen if Attendance Rx cannot locate the
device.
To uninstall (remove) a Biometrics Device:
1. Click “Remove Device” below the drop down.
2. Turn off the Biometrics by clicking on the check box.
Close the window by pressing the button.