Activeforever AutoCloser Automatic Garage Door Closer - Manual (Page 18)

18
10. Drill holes for the I-Opener terminal plate. Position the back of the terminal
in the hole. Mark the terminal plate holes with a pencil. Remove the terminal
plate and drill the plate holes with a 1/8-inch drill.
11. Fasten the terminal plate to the doorframe. Reposition the terminal plate
with terminal in the hole. Use 1 inch #8 wood screws, Item (12), to fasten the
plate to the doorframe (Fig. 11).
Fig. 9
Fig. 11
www.ActiveForever.com