Activeforever AutoCloser Automatic Garage Door Closer User Manual
Page 28
29
6.
Do I have to install the disable button? Yes, while the unit will work without
the disable button installed, it is needed to re-enable the system after a
malfunction. The disable is also a convenient way to temporarily dis-
able the unit without turning it off.
7.
I returned home to find my garage door open. Why did my
Autocloser fail to
close my garage door? If you hear a beep once every 20 seconds and find the
disable LED blinking, the unit did attempt to close the door. The Autocloser
will attempt to close your garage door 2 times. Reasons why the door might
re-open include binding door wheels or an obstruction in the path of the door.
The Autocloser may have attempted to close the door but failed due to the
previous reasons. The Autocloser does not interfere with the mandatory
safety features included on modern garage door openers. Re-enable the Auto-
closer by pressing the disable button.
8.
I lost one of my I-Opener electronic keys. How do I erase the lost key’s se-
rial number? Switch the Autocloser to setup mode and press the disable but-
ton. All key codes are now erased. Reprogram your remaining keys by fol-
lowing step 5 in the Operation and Programming section of this manual.
9.
Can a burglar open my garage by shorting out the I-Opener terminal? No, the
Autocloser
reads the unique electronic key code and compares it to the pre-
programmed key codes before it opens the door. It would be virtually impos-
sible to simulate the electronic key’s code.
10.
Can I order additional keys? Yes, please log on to autocloser.
com for ordering information.