Activeforever AutoCloser Automatic Garage Door Closer User Manual
Page 27
28
FAQ
1. Can I have my unit professionally installed? Xceltronix, Inc. is partnering
with local professional garage door installers to provide set pricing on pro-
fessional inspection and installation. Please go to autocloser.com/ for a list
of approved installers.
2. Why does my garage door opener need to be fully consumer product safety
commission compliant in order to be used with the Autocloser? The Auto-
closer relies on safety features mandated by congress, and detailed by the
consumer products safety commission, in order to protect your home and
family from accidents related to garage doors.
3. When adjusting the reflector, should the unit beep continuously when the
door reflector is aligned? Yes, the unit will continually beep if the door is
fully open, the reflector is aligned and the unit is in setup mode.
4. What happens if I push the garage door opener wall button while the door
is closing? The Autocloser will attempt to close your garage door two
times. If you push the wall button while the door is closing the first time,
the door will either stop closing or reverse and re-open. The Autocloser
will then check to see if the door closed. If the door stops and is far enough
away from the door detector, the Autocloser will think the door is shut and
transition to monitor mode. If the door re-opens, the Autocloser will detect
the open door and attempt to close it one more time. If you push the wall
button while the door is closing the second time, the door will either stop
closing or reverse and re-open. The Autocloser will then check to see if the
door closed. If the door stops and is far enough away from the door detec-
tor, the Autocloser will think the door is shut and transition to monitor
mode. If the door re-opens, the Autocloser will detect the open door and
transition to malfunction disable mode due to the door failure. The disable
button must then be pushed in order to put the Autocloser back into moni-
tor mode.
5. Will pressing the disable button stop a garage door that is already moving?
The disable button WILL NOT stop a moving garage door. Press the ga-
rage door opener wall control button to reverse a moving garage door. The
disable button only affects the Autocloser
, not the garage door opener.