ACU-RITE MILLPWR 2 Axes - Manual (Page 104)

PROGRAM STEPS
MILLPWR ®
Operation Manual
Frame
When you program a rectangular frame, you define it by its first corner, and its size
or diagonal corner.
To program a rectangular frame:
• Press the RECT key.
• Press the FRAME softkey.
• Enter the X- and Y-axes coordinates for the frame's 1 ST
corner.
• In the “Size” field, enter the length of the frame along the
X- and Y-axes (unless you are programming a 2
ND corner).
• Enter the depth.
• Enter a corner blend radius (optional).
• For “Direction,” press either the CW softkey for clockwise or the CCW softkey
for a counter-clockwise direction.
5-15