ACU-RITE MILLPWR 2 Axes - Manual (Page 190)

SETUP
MILLPWR ®
Operation Manual 7-21
• Press the SET OUTSIDE LIMIT softkey.
Note: The Y-axis travel field will update to show you the
maximum allowable travel distance between the inside
and outside table travel limits.
• Press the USE key.
• Continue with Setup or press the USE NEW SETTINGS softkey.
You may
change the
table travel lim-
its at any time.
With the error checking feature enabled, MILLPWR can detect scale miscounts and
record them in the Error Log. MILLPWR will stop the program if a scale miscount is
detected.
Error Checking
To enable/disable the error checking feature:
• From Installation Setup, highlight “Error Checking”
and press
ENTER .
• Press either the ENABLE or DISABLE softkey.
• Press the USE key.
• Continue with Setup or press the USE NEW
SETTINGS softkey.