ACU-RITE MILLPWR 2 Axes - Manual (Page 78)

DEMONSTRATION
MILLPWR ®
Operation Manual 4-9
• Press the LINE key.
• Enter the following information:
TO: X2 = .75
• Now press the ABS/INCR key.
MILLPWR assumes that you want to use the
X coordinate of the “From” point (X1) as your
incremental reference, which is exactly what
is needed.
• Press ENTER to confirm this and again to accept the
value.
• Now enter the location of Y2 in the “To” field:
TO: Y2 = 0
• Press the USE key.