Setup, Operation manual – ACU-RITE MILLPWR 2 Axes User Manual

Page 191

Advertising
background image

SETUP

MILLPWR

®

Operation Manual

7-22

Serial Port

You can connect

MILLPWR

to a PC via the serial port (located on the rear of the operator

console). The serial port allows you to store part programs on a PC.

To activate the serial port:

•

From Installation Setup, highlight “Serial Port”
and press

ENTER

.

•

Press the

REMOTE STORAGE

softkey to change

the “Function” setting from “Off” to “Remote
Storage.”

•

Highlight “Baud Rate.”

•

Define the Baud rate by pressing the

LOWER

or

HIGHER

softkeys. The Baud rate you select must

match the PC’s Baud rate.

•

Highlight “Handshaking.”(The handshaking feature verifies that

MILLPWR

and the

PC are communicating properly during file transfers.)

•

Press the

ENABLED

softkey.

•

Press the

USE

key.

•

Continue with Setup or press the

USE NEW SETTINGS

softkey.

Advertising