ACU-RITE MILLPWR 2 Axes - Manual (Page 108)

PROGRAM STEPS
MILLPWR ®
Operation Manual 5-19
Slot
You can program a slot two ways:
• By entering the center point of each arc and the slot's width
• By entering the center point of one arc, the length and width of the slot, and the
tilt angle
Choose a method based upon the information available from the print.
To program a slot:
• Press the RECT key.
• Press the SLOT softkey.
• Enter the X- and Y-axes coordinates for the “1 ST Arc
Center.”
• Enter the X- and Y-axes coordinates for the “2 ND Arc
Center” or press the MORE softkey and enter the
“Slot Length” and “Tilt Angle.”
• Enter the depth.
• Select the direction you want the slot to be cut.
Press the
CW softkey for clockwise or the
CCW softkey for a counter-clockwise direction.
• Enter the slot's width.