ACU-RITE MILLPWR 2 Axes - Manual (Page 18)

DRO
MILLPWR ®
Operation Manual 2-1
DRO
Start Up
Power Up
Turn the power switch (located on the rear of the operator console) to “I.” The Power
Indicator (located in the upper left corner of the operator console) will light up.
Anytime the system is inactive for approximately 20 minutes, the LCD display will
shut off, and a blank screen will appear. This screen saver function is designed to
prolong the life of the operator console display. If the screen is blank, check that
the Power Indicator light is illuminated. Press any key on the operator console or
move the table and the display will reappear. If the Power Indicator light is not
illuminated, then power to the
MILLPWR system has been interrupted.
Screen Saver