Hazard avoidance, Cell movement – Garmin G1000 Mooney M20TN User Manual

Page 296

Advertising
background image

190-00647-01 Rev. B

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN

285

HAZARD AVOIDANCE

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

CELL MOVEMENT

Cell Movement data (Figure 6-20) shows the location and movement of storm cells as identified by the

ground-based system. Cells are represented by yellow squares, with direction of movement indicated with
short, orange arrows.

Figure 6-20 Cell Movement Data

Storm Cells

On most applicable maps, Cell Movement data is selected for display along with NEXRAD. On the Weather

Data Link Page, Cell Movement data can be selected independently. Cell Movement data can be displayed
on the following maps:
• PFD Inset Map

•Navigation Map

• AUX - Trip Planning Page

• Nearest Pages

Displaying Cell Movement information:

1)

Press the MAP Softkey (for the PFD Inset Map, press the INSET Softkey). This step is not necessary on the
Weather Data Link Page.

2)

Press the NEXRAD Softkey (CEL MOV Softkey on the Weather Data Link Page). For Cell Movement to be
displayed on maps other than the Weather Data Link Page, Cell Movement must be turned on in the Navigation
Map Setup Menu (see “Setting Up XM Satellite Weather”).

To display the Cell Movement legend on the Weather Data Link Page, (Figure 6-21), press the LEGEND

Softkey when Cell Movement is selected for display.

Figure 6-21 Cell Movement Legend

Advertising
This manual is related to the following products: